Screw Conveyor Weighment or
Screw Weigh Feeder
Screw Conveyor or Screw Weigh Feeder from HITECH ONWEIGH utilize a specially designed screw conveyor as the weighing and conveying equipment.
And as well they provide the total product in closed enclosure that eliminates the typical problematic environmental difficulties usually experienced with the common types of weigh belt type weigh feeders.
,
Ideal solution
Screw Weigh conveyors are closed, dust-tight systems, which transport even difficult products reliably.A weighing screw conveyor measures the actual material flow and the absolute during the material is conveyed.A weighing screw conveyor can be retrofitted for many existing types of screws. Alternative we can supply the complete system consisting of screw conveyor and weighing equipment.
The Weigh Screw Feeder is rugged, mechanically simple, has only moving parts and requires an absolute minimal amount of maintenance. The weigh screw and its housing are constructed of all MS / SS; continuously seal welded and ground smooth. The auger is then polished, plated and polished again to achieve an extremely hard and smooth surface capable of resisting adhesion and wear.
Screw Weigh Feeder Features
Accuracy: Metering accuracy will be + 0.25 to 1 / 0.5- 1.5 % percent or better
Range: Weigh screw Feeder is capable of an overall feed range of 20:1 from the maximum designed output capacity of the feeder.
Output capacity: 0.05 to 50 TPH as per model.
Screw Conveyor Weighment Controls
Weigh screw Feeders utilize multiprocessor controllers specifically programmed by us to provide unparalleled weigh feeder performance. The standard model Weigh Screw Feeder will operate within an ambient temperature range of -10° to 85°C. All motors are totally enclosed. The controller provides capability of controlling sequence and other process if user needs.
Volumetric Mode of Operation
Weigh screw Feeders are equipped with a manual mode of operation whereby the unit may be operated strictly as a volumetric feeder, if ever required. The weigh screw, in volumetric operation, is used for conveying purposes only.
Specification
Model: OW-SWF
Weigh Feeder Size: From 1000 mm Lengthonwards; OD: 100 mm – 500/600 mm
Material to be conveyed: From fine powder to any size of lumps
Reach Us
EIFERS PROCESS AUTOMATION PRIVATE LIMITED
No. 2/166, Balaji Industrial Park,Senthampalayam,
P.G.Pudur Post, S.S.Kulam Via,
Coimbatore – 641 107
Tamilnadu
India
+91 93450 03246
+91 93631 03246
+91 78688 38838